Rashmi Scientific Company
Guindy, Chennai, Tamil Nadu
GST No. 33AUYPS4106R1ZP
08046050482 81% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Laboratory Instruments
| Minimum Order Quantity | 1 Piece |
| Temperature (Deg. Celsius) | 250 Degree C |
| Number Of Tray | 48 Trays |
| Automatic Grade | Automatic |
| Voltage (V) | 415 V |
| Power (W) | 6.0 Kw |
| Controller Type | Digital PID temperature Controller |
| Heating Element | Nichrome wire |
| Temperature Accuracy | - 1 Deg C |
Triple walled chamber, inner made of thick stainless steel sheets and outer made up of cold rolled mild steel sheets duly finished in powder coating. Interspace in between the walls is tightly packed with special grade glass wool.
Inner chamber accommodates twelve nos. of perforated stainless steel trays at adjustable heights. Insulated double walled door mounted on heavy-duty hinges, in the front is provided with locking arrangements.
Heating is achieved by Kanthal A-1wire heaters evenly distributed at the right side and left the side of the chamber.
Temperature is indicated and controlled by Microprocessor based digital PID temperature controller working in conjunction with FEK thermocouple kept in the hot zone. Air circulating fan assembly driven by a suitable motor is incorporated in the unit for maintaining uniform temperature within the working chamber. Adjustable air ventilator is provided at the top.
Built-in control panel comprises Digital Temperature controller, Main Lamp, Load Lamp, On /Off Switch, for fan and heater etc. are provided at the side of the chamber.
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Power | 300 Watt |
| Temperature | 700 Deg C |
| Voltage | 220 V |
| Phase | Single Phase |
| Usage | For Laboratory |
The heater coil is conically shaped and consists of spirally wound Nichrome coil is accommodated in grooves provided on the refractory case with proper insulation is enclosed in a stainless steel casing.
The stainless steel casing is mounted at the top of cylindrical stainless steel housing to avoid undue temperature rise, sufficient holes are provided in the lower housing and also given a gap between the stainless steel cylinder and regulator box. A cowl is provided at the top operating.
Built-in regulator box is made of aluminium duly power coated provided with indicating lamp, power cord and energy regulator to control the temperature, so designed in such a way not to affect the Energy Regulator.
The unit is designed to an overall rating of 350 WATTS. Maximum temperature is 800 degree.
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Chemical Laboratory |
| Country of Origin | Made in India |
| Material | Stainless steel |
| Voltage | 240 V |
| Capacity | 10 Litres |
| Power | 8000 W |
Wall mounting type: The entire fabrication is made of stainless steel and supplied in the highly polished finish. The unit comprises of a main boiling chamber with a high dome lid and provided with a water gasket and tubular condensing column with an automatic water level arrangement to maintain the water level inside the chamber always constant.
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Std Glass Filters | 8 Filters |
| Display | Digital |
| Detector | Photodiode |
| Mobility | Fixed |
| Spectral Range | 670 mm |
| Photometric Range | +- 1. 99 abs |
| Control | Micro |
| Minimum Order Quantity | 1 Piece |
| Material | Metal |
| Automation Grade | Manual |
| Temperature Range (deg. Celsius) | 0 degree C to Room Temperature |
| Capacity (l) | 15 Litres Capacity. |
| Voltage (V) | 240 V |
| Working Chamber Size | 200 x 200 x 250 mm |
| Accuracy | +- 2 degree celsius |
Double walled chamber, inner chamber made of stainless steel and outer chamber made of cold roll mild sheet with powder coat finish. The inter space in between the walls is packed with thermorex to avoid temperature loss.
The chamber is provided with top opening lid made of stainless steel and provided with handle. Evaporating coils are kept inside the inner chamber for faster cooling. The refrigeration system consisting of compressor Donfoss, air cooled condenser and accessories is provided at the lower portion of the bath.
The temperature is controlled by a digital temperature controller with an accuracy of ±1°C. The unit is fitted with a pump for re-circulate the liquid in the tank to maintain uniform temperature inside the bath.
Built in control panel with indicator lights, ON/OF switches, Digital Temperature Controller are provided.
| Optical System | Single Beam |
| Spectral Bandwidth | 2 nm |
| Grating | 1200 lines/mm |
| Data Output Port | USB |
| Display | 7 Inch LCD |
| Voltage | 230 V |
*Your information is safe with us.
| Portable | Yes |
| Condition | New |
| Power (W) | 1800 W |
| Illumination (V) | 380 V |
| Material | Steel |
| Application | Industrial, Laboratory |
| Head and body | well balanced inclinable body monocular head at 90 |
| Eye pieces | H 10x and h5xor h15x (any two) |
| Objectives | 10x, 40x/45x (sl), 100x (oil) |
| Head and body | well balanced inclinable body monocular head at 90? ? |
| Objective holder | dust proof tipple/quadruple revolving nose piece to hold up to 3-4 objectives |
| Eye pieces | h 10x and h5xor h15x (any two) |
| Objectives | 10x, 40x/45x (sl), 100x (oil) |
| Stage | fixed square plain stage with precision, mechanical stage for x-y movement |
| Focusing | separate coarse and highly sensitive ,graduated fine focusing knobs |
| illumination | plano concave mirror |
| Size (length x Width) | 2.5 cm x 2.5 cm |
| Voltage (V) | 220 V |
| Power (Kw) | 1500 W |
| Material | Steel |
| Height of the rack | 175 cms |
| Width | 125 cms |
| No of shelves | 5 |
Height of the rack 175cms width 125cms. Total Shelves – 5, shelves
illuminated – 4. Four tube lights in each shelf – total No of tube light –
16. No. of shelf size 122 x 45 cm (50” x 17”). Steel powder coated white
paint. Each tube light is connected with one electronic ballast. One
main ON-OFF switch. A terminal block to connect rack to 220volts AC.
An SB fuse. Frame mild steel 2.5cm x 2.5cm off white color. The
instrument will be supplied with castor wheel 3” at base and 24hrs
electronic cyclic timer with relay switch 1500W and circuit breaker.
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Power | 350 watt |
| Maximum temperature | 800 degree |
| Power source | Electric |
| Voltage | 240 V AC |
| Usage | Industrial And Laboratory |
| Phase | Single Phase |
The heater coil is conically shaped and consists of spirally wound Nichrome coil is accommodated in grooves provided on the refractory case with proper insulation is enclosed in a stainless steel casing.
The stainless steel casing is mounted at the top of cylindrical stainless steel housing to avoid undue temperature rise, sufficient holes are provided in the lower housing and also given a gap between the stainless steel cylinder and regulator box. A cowl is provided at the top operating.
Built-in regulator box is made of aluminium duly power coated provided with indicating lamp, power cord and energy regulator to control the temperature, so designed in such a way not to affect the Energy Regulator.
The unit is designed to an overall rating of 350 WATTS. Maximum temperature is 800 degree.
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Shape | Circle |
| Operating Voltage | 240 V |
| Power Source | 1000 W |
| Country of Origin | Made in India |
| Material | Steel |
| Usage/Application | Laboratory |
This is a heavy duty heating plate with a removable mild steel/stainless Steel plate at the top. The housing is made of mild steel sheet and finished in powder coat paint. A heat control switch for low, medium and high heat and two nos., indicating lamps are provided on the front panel.
* Both SS & MS Top are Available.
| Minimum Order Quantity | 1 Piece |
| PH Range | 14 |
| Usage | Industrial, Laboratory |
| Accuracy (Percent) | 0.5% |
| Voltage (Volt) | 240 V |
| Cell Constant | 0-1000m Mhos/cm |
| Display | LED Digital |
Conductivity Meter LED Display bench model with facility for temperature compensation and digital cell constant adjustment range 0-1000m Mhos/cm. without temperature probe. (5 ranges in 0-200us/cm, 0-20ms/cm, 0-200ms/cm, 0-1000ms/cm)
| Minimum Order Quantity | 1 Piece |
| Material | Steel |
| Voltage | 230V |
| Size | 160(W) x 190(D) x 115(H) |
| Capacity | 250 ML |
| Display | LCD |
| Type | Cyclo Mixer |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Material | Plastic and steel |
| Usage/Application | Laboratory |
| Display | Digital |
| Measurement Range | 220 g |
| Accuracy | 0.1 mg |
| Handling | Portable |
| Minimum Order Quantity | 1 Piece |
| Resolution (Ph) | 0.01 |
| pH Range | 0 to 13 |
| Type | Digital |
| Power (Volt) | 230 V |
| Accuracy (Ph) | +- 0.01 |
| Type of PH Meter | Portable, Table-Top, Hand-Held |
| Minimum Order Quantity | 1 Piece |
| Material | Mild steel |
| Automation Grade | Manual |
| Surface Type | Powder coated |
| Power Source (V) | 380 V |
| View Piece | Aluminium Casting with Eye Protection |
| Tube size | 12 Inch |
| Model | Mild Steel, Powder Coated |
| Size | 15" X 12" X 10" (H) |
| View Piece | Aluminium Casting with Eye Protection |
| Light Source | A) Short Wave - 254 nm. B) Long Wave - 365 nm. C) Visible Light |
| Tube Size | 12" Long |
| Working | Individual Toggle switch provided for each light. |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Number Of Stages | Double Stage |
| Power | 1 Phase |
| Brand | Rashmi Scientific |
| Max Flow Rate | 600 LPM |
| Usage/Application | Industrial |
| Material | Cast Iron |
| Type | Belt Driven & Oil Lubricant |
| Minimum Order Quantity | 1 Piece |
| Ph Range | 13 |
| Power | 230V |
| Accuracy | +-0.01 |
| Type Of Ph Meter | Table-Top |
| Country of Origin | Made in India |
| Resolution | 0.01 ph |
| Type | Digital |
| types of ph meter | Table-Top |
| Minimum Order Quantity | 1 Piece |
| Slot size accuracy | 0.1 mm |
| Thickness | 0.6mm |
| Flakiness index sieve set | 7 |
| Width of Aperture | 4.75 mm |
| Applications | Determining graded, filters, selection of grating materials, designing of Cement and Asphaltic |
| Voltage | 380 V |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Country of Origin | Made in India |
| Weight | 5 Kg |
| Dimension | 300 W x 220 D x 260 mm |
| Automation Type | Semi Automatic |
| Material | Mild Steel |
| Usage/Application | For Laboratory Use. |
| Minimum Order Quantity | 1 Piece |
| Country of Origin | Made in India |
| Power | 125 Watt |
| Material | Mild Steel |
| Frequency | 50 Hz |
| Temperature Range | 250 Deg C |
| Operation Grade | Manual |
The apparatus is made of mild steel duly powder coated by a powder coating finish. The heating block is made of solid aluminium with 125Watts, which is controlled by a SUNVIC regulator device. In the heating block there are provisions to keep two capillary tubes and a thermometer to find out the temperature at which the solid phase changes into liquid phase. There is a lens in the front side of the instrument and a light source inside the instrument to manify and illuminate the zone of melting.
| Minimum Order Quantity | 1 Piece |
| Display Type | Digital |
| Operation Grade | Manual |
| Material | Mild Steel |
| Temp. Range (deg. Celsius) | 360 Degree C |
| Frequency (Hz) | 50 Hz |
| Accuracy in deg celsius | +- 2 Degree C |
| Wattage | 125 Watts |
The apparatus is made of mild steel duly powder coated by a powder coating finish. The heating block is made of solid aluminium with 125Watts, which is controlled by a SUNVIC regulator device. In the heating block there are provisions to keep two capillary tubes and a thermometer to find out the temperature at which the solid phase changes into liquid phase. There is a lens in the front side of the instrument and a light source inside the instrument to manify and illuminate the zone of melting.
Temperature Range : : 5°C above ambient to 360°C. with an accuracy ± 2°
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Power source | Electric |
| Body Material | Stainless Steel |
| Defrost Type | Auto-Defrost, Frost-Free |
| Door Type | Top Open Door |
| Capacity ( in Ltr) | 500 L, 300 L |
| Temperature Range | Ambient to -20 degree C |
| Type | Upright |
Double walled chamber. Inner chamber made of thick stainless steel well polished and fusion welded. The outer chamber is made of cold rolled steel sheets and attractively finished in powder coat finish. The inner chamber accommodates stainless steel trays at the adjustable height. High-class insulation with the combination of special grade glass wool and thermocol is provided on all sides between the two walls to minimize the sweating in humid condition. Evaporating coils are lead soldered and fixed in the back side of the inner chamber. A double walled door in front provided with heavy magnetic gasket for perfect sealing and provided with heavy-duty latching arrangement. Temperature maintained and controlled by digital temperature controller working in conjunction with PT100 sensor. Door operated illumination lamp is provided inside the chamber. A refrigerant system consists of the compressor, air-cooled condenser and heavy duty motor-driven fan is provided at the bottom while the control panel with built-in digital temperature controller cum indicator, indicators, switches etc., provided on the top of the cabinet.
| Minimum Order Quantity | 1 Piece |
| Frequency (Hz) | 50 Hz |
| Voltage (V) | 240 V |
| Utility Service | Gas, Vacuum |
| Application | Industrial |
| Bending Strength | 1.0 Mpa |
| Capacity | 3 ton |
| Thermal Conductivity | 0.025 W/ mK |
Description : Fume Hood Exhaust System
Size : Size : L 3ft x W 2ft x H 3ft
M.O.C. : M.S. with powder coated
Working Area : P.P. (Poly Propylene) Sheet
Blower Details:
Volume : 1000 CFM
Pressure : 2.5” W.G.
Motor : ½ HP / 3 phase motor
PPM : 1440
Type : Centrifugal
Duty : Exhaust
Model : RASHMI 900 FH
Balancing : Dynamically
Impeller : Radial straight type
Construction of Material:
Casing : 3 mm M.S.
Impeller : 3 mm thick molded M.S. & FRP Coating Suitable for Acid, alkali, Heat resistance
Door:
Door frame made of M.S. with glass 5 mm thick
Door movement will be vertical sliding with counter weight balance arrangement
| Minimum Order Quantity | 1 Unit |
| Frequency (Hz) | 50 Hz |
| Voltage (V) | 220 V |
| Power Source | Electric |
| Phase | Single Phase |
| Usage/Application | For Laboratory |
| Power | 1200 Watt |
| Noise Level | Less Than 50 DBA |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Automation Grade | Manual |
| Power | 2 HP |
| Warranty | Required |
| Installation/ After Sales Service | Provided |
| Condition | New |
| Brand | Rashmi Scientific |
| Material | Aluminium |
| Mounting | Bench-top |
| Capacity | 600 Litres |
| Voltage (Volt) | 240 V |
| Type | Oil Lubricant Vacuum Pumps |
| Number of Stages | Single stage |
This rotary oil sealed pumps are quiet operating and vibrationless, designed for continuous working and tested to assure satisfactory performance. The mechanism is contained in a metal case with oil level sight gauge and drain plug at the base. Motor driven pumps are completely mounted on the rectangular base plate and are furnished with V belt & Motor. Supplied with Oil Trap & vacuum gauge.