|Size||3 X 2 X 2|
Classic stand mounted Class II Type –A2.The downward HEPA filtered laminar air flow ensures Product Protection while the HEPA filtered exhaust air takes care of Environmental Protection
Airflow pattern is designed for 70% re-circulation in work area through HEPA filter and the balance 30% exhausted through HEPA filter to the ambient
The return air plenum is under Negative Pressure with respect to ambient
Bio Safety Cabinet with HEPA filters, Pre-fixed blower assembly, table top, UV lamp, transparent front doors, meno meter, gas cock, leveling jack or Moving wheel etc.
ü Cabinet made from GI Construction, Table Top SS 304 grade.
ü HEPA Filtration System
ü Motor Blower
ü Microprocessor controller
ü Sealed white Fluorescent light
ü Gas cock/Vacuum & Gas burner
Extra power outlet socket 5/15 Amp
Air Flow: - Designed for 0.45m/s to 0.65 m/s when measure across the enfilter space during the rated life cycle of filters.
Pre-Filter: - Classic Filters compressing the pre-filter and intermediate filters made of depth media, specially treated with anti-fungal and bactericidal reagents to inhibit growth of micro-organisms, possess enhance characteristics like fire, retardence and water repellence, Efficiency 40 – 60% for Pre-Filters and 60- 90% for intermediate Filters
HEPA Filters: - HEPA Filters made of glass fiber filter media pleats double layered with aggregates less than 3520 particles per cubic meter of 0.5 microns and larger wherever class 100 conditions are specified. Bore size 0.12 micron &99.99% efficiency.
Illumination: - 100 watts per sp. Meter of work area.
Impellers: - High performance noise abated statically and dynamically balanced
Blower Motor: - Custom build dual outlet blower assembly statically and dynamically balanced, direct drive type, sized to provide adequate airflow volume over the full life cycle of the HEPA filters. Special bearings and unique suspension mounting ensure low vibration and noise level.
Power Supply: 230 v AC, 50Hz, < 0.5KW
Standards: - IEST-RP-CC-002-86, US FED STD 209
Ø Deep-pleat HEPA FILTER
Ø Control Circuit Breaker
Ø 1 year Warranty
Ø Mano meter
Ø Acrylic Front door
|Minimum Order Quantity||1 Piece|
|Filters||Hepa Filter, Pre Filter|
|Power||Single phase 220V / 50Hz|
|Light||Florescent Light, U.V. Light|
|Power point||5/15Amp 1No|
Classic imitative free standing workstation with frequency Modulated airflow on the most preferred design for microbiological manipulations, bioassays and sterling testing. That includes bio-clean protection for semiautomatic vial filling and binging operations in potential production, hospitals, pathological laboratories, and agriculture biotechnology specifications.
Vertical laminar Air Flow cabinet with HEPA filters, Pre fixed blower assembly stainless steel table top, UV lamp, transparent front doors, Magnehelic gauge , gas cock, side view glass panel, level jack, wheel etc.
Description : VERTICAL LAMINAR AIR FLOW SYSTEM
M.O.C : Stainless Steel
Air Flow:- Designed for 0.45 m/s to 0.65 m/sec when measuring across the entire filter space during the rated life cycle of filters.
Pre Filter:- Classic filters compressing the pre-filter and made of depth media, specially treated with anti-fungal and bactericidal reagents to inhibit the growth of micro-organisms, possess enhance characteristics like five retardance and water repellency. Efficiency 40-60% for pre-filters.
HEPA Filters:- HEPA Filters made of glass fiber filter media pleats double layered with immatched life cycle guarantee. Efficiency rating 99.97% down 0.3 microns when tested as per IES recommended practice.
Cleanliness Level – Class 3.5 (USFED209E) first air quality with aggregates less than 3530 particles per cubic meter of 0.5 microns and larger wherever class 1000 conditions are specified.
Illumination: 100 watts per Sq.Meter of work area.
Impeller:- High performance noise abated statically and dynamically balanced Motor–Blower custom build dual outlet blower assembly statically and dynamically balanced, direct drive type, sized to provide adequate airflow volume over the full life cycle of HEPA Filters.
Special bearings and unique low vibration and noise level.
Power Supply:- 230V AC, 50Hz, <0.5KW
Standards:- IES-RP-CC-002-86, US FED STD 209
2 x 2 x 2 Ft
3 x 2 x 2 Ft
4 x 2 x 2 Ft
6 x 2 x 2 Ft